Fuel and air mixture · Petrol and diesel

P0200 Injector circuit fault (general)

Standard definition: Injector Circuit Malfunction

SeverityHigh
Is it safe to drive?With care, short distances
Estimated cost$40 – $1,600
Can you check it yourself?Mechanic needed

What does P0200 mean?

There is a general fault in the injector driver circuit; the cylinder isn't specified. Common causes are the shared supply line, a fuse or relay, or the injector driver stage in the ECU.

With care, short distances: Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

P0200 symptoms

P0200 causes (most to least common)

  1. Most common Injector supply relay / fuse
  2. Damage to the shared wiring
  3. On diesels, the injector voltage capacitor / ECU driver
  4. More than one faulty injector

How do you check and fix P0200?

  1. Check the fuses and relays.
  2. Measure the supply voltage at the injector connectors.
  3. Look at the cylinder-specific codes (P0201–P0208) and the balance values.

P0200 repair cost

Depending on the cause, roughly $40 – $1,600 (parts + labor; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.

Related fault codes

Frequently asked questions

What does fault code P0200 mean?

P0200 means "Injector Circuit Malfunction": Injector circuit fault (general). There is a general fault in the injector driver circuit; the cylinder isn't specified. Common causes are the shared supply line, a fuse or relay, or the injector driver stage in the ECU.

Can you drive with P0200?

With care, short distances. Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

What causes a P0200 fault?

Most common causes: injector supply relay / fuse, damage to the shared wiring, on diesels, the injector voltage capacitor / ECU driver. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.

How much does a P0200 repair cost?

Depending on the cause, it costs roughly $40 – $1,600 (parts + labor; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.

Will clearing the P0200 code fix the problem?

No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.

Fuel and air mixture codes

All fuel and air mixture codes → · All OBD fault codes →

This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.