Fuel and air mixture · Petrol and diesel

P0193 Fuel rail pressure sensor signal high

Standard definition: Fuel Rail Pressure Sensor Circuit High

SeverityMedium
Is it safe to drive?With care, short distances
Estimated cost$80 – $640
Can you check it yourself?Mechanic needed

What does P0193 mean?

The sensor signal is very high; usually a break in the ground wire or a sensor fault.

With care, short distances: Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

P0193 symptoms

P0193 causes (most to least common)

  1. Most common Broken ground
  2. Faulty sensor
  3. Connector

How do you check and fix P0193?

  1. Measure the ground wire continuity.
  2. Check the connector.

P0193 repair cost

Depending on the cause, roughly $80 – $640 (parts + labor; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.

Related fault codes

Frequently asked questions

What does fault code P0193 mean?

P0193 means "Fuel Rail Pressure Sensor Circuit High": Fuel rail pressure sensor signal high. The sensor signal is very high; usually a break in the ground wire or a sensor fault.

Can you drive with P0193?

With care, short distances. Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

What causes a P0193 fault?

Most common causes: broken ground, faulty sensor, connector. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.

How much does a P0193 repair cost?

Depending on the cause, it costs roughly $80 – $640 (parts + labor; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.

Will clearing the P0193 code fix the problem?

No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.

Fuel and air mixture codes

All fuel and air mixture codes → · All OBD fault codes →

This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.