Fuel and air mixture · Petrol and diesel

P0204 Cylinder 4 injector circuit fault

Standard definition: Injector Circuit Malfunction – Cylinder 4

SeverityHigh
Is it safe to drive?With care, short distances
Estimated cost$120 – $1,100
Can you check it yourself?Mechanic needed

What does P0204 mean?

The engine computer detected an open or short circuit in the cylinder 4 injector circuit. The injector coil may have burnt out, its connector may have come loose or its wiring may be damaged. Because this cylinder can't get fuel, a misfire usually comes with it.

With care, short distances: Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

⚠️ After replacing a diesel common rail injector, the injector code (IMA/IQA) must be programmed into the ECU.

P0204 symptoms

P0204 causes (most to least common)

  1. Most common Faulty cylinder 4 injector coil
  2. Poor contact / corrosion at the injector connector
  3. Break or short in the wiring
  4. Faulty injector driver in the ECU (rare)

How do you check and fix P0204?

  1. Check the injector connector by unplugging and refitting it.
  2. Measure the injector resistance: usually 11–16 Ω for high-impedance petrol injectors.
  3. Swap the injector with a neighbouring cylinder and see whether the code moves (diesels may need coding).

P0204 repair cost

Depending on the cause, roughly $120 – $1,100 (parts + labor; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.

Related fault codes

Frequently asked questions

What does fault code P0204 mean?

P0204 means "Injector Circuit Malfunction – Cylinder 4": Cylinder 4 injector circuit fault. The engine computer detected an open or short circuit in the cylinder 4 injector circuit. The injector coil may have burnt out, its connector may have come loose or its wiring may be damaged. Because this cylinder can't get fuel, a misfire usually comes with it.

Can you drive with P0204?

With care, short distances. Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse. After replacing a diesel common rail injector, the injector code (IMA/IQA) must be programmed into the ECU.

What causes a P0204 fault?

Most common causes: faulty cylinder 4 injector coil, poor contact / corrosion at the injector connector, break or short in the wiring. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.

How much does a P0204 repair cost?

Depending on the cause, it costs roughly $120 – $1,100 (parts + labor; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.

Will clearing the P0204 code fix the problem?

No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.

Fuel and air mixture codes

All fuel and air mixture codes → · All OBD fault codes →

This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.