U0101 Lost communication with the transmission control module (TCM)
What does U0101 mean?
Other modules aren't receiving messages from the transmission control module. In modern cars the control units talk over a shared line called CAN; a problem on it can make several warning lights come on at once.
With care, short distances: Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.
U0101 symptoms
- Several warning lights coming on at the same time
- Gauge needles dropping or freezing
- Limp mode, sometimes no start
- Symptoms may sometimes clear up on their own
U0101 causes (most to least common)
- Most common Low battery voltage (very common)
- The affected module's supply / fuse
- Break or short in the CAN wiring
- Moisture / corrosion in connectors
- Module fault
How do you check and fix U0101?
- Check the battery and charging voltage first; a weak battery is the most common cause of communication codes.
- Check the affected module's fuses.
- At the diagnostic socket there should be ~60 Ω between CAN-H and CAN-L (ignition off, battery disconnected).
- Inspect connectors in areas where water gets in (inside doors, the boot, under the glovebox).
❌ Common mistake: Before replacing a module, don't skip checking the battery, fuses and wiring; most U codes come from the electrical supply.
U0101 repair cost
Depending on the cause, roughly £20 – £980 (parts + labour; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.
Related fault codes
Frequently asked questions
What does fault code U0101 mean?
U0101 means "Lost Communication with TCM": Lost communication with the transmission control module (TCM). Other modules aren't receiving messages from the transmission control module. In modern cars the control units talk over a shared line called CAN; a problem on it can make several warning lights come on at once.
Can you drive with U0101?
With care, short distances. Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.
What causes a U0101 fault?
Most common causes: low battery voltage (very common), the affected module's supply / fuse, break or short in the CAN wiring. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.
How much does a U0101 repair cost?
Depending on the cause, it costs roughly £20 – £980 (parts + labour; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.
Will clearing the U0101 code fix the problem?
No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.
Network and communication (U codes) codes
All network and communication (u codes) codes → · All OBD fault codes →
This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.