U0100 Lost communication with the engine control module (ECM/PCM)
What does U0100 mean?
Another module (e.g. transmission, ABS, instrument cluster) isn't receiving messages from the engine control module. In modern cars the control units talk over a shared line called CAN; a problem on it can make several warning lights come on at once.
With care, short distances: Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.
U0100 symptoms
- Several warning lights coming on at the same time
- Gauge needles dropping or freezing
- Limp mode, sometimes no start
- Symptoms may sometimes clear up on their own
U0100 causes (most to least common)
- Most common Low battery voltage (very common)
- The affected module's supply / fuse
- Break or short in the CAN wiring
- Moisture / corrosion in connectors
- Module fault
How do you check and fix U0100?
- Check the battery and charging voltage first; a weak battery is the most common cause of communication codes.
- Check the affected module's fuses.
- At the diagnostic socket there should be ~60 Ω between CAN-H and CAN-L (ignition off, battery disconnected).
- Inspect connectors in areas where water gets in (inside doors, the boot, under the glovebox).
❌ Common mistake: Before replacing a module, don't skip checking the battery, fuses and wiring; most U codes come from the electrical supply.
U0100 repair cost
Depending on the cause, roughly £20 – £980 (parts + labour; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.
Related fault codes
Frequently asked questions
What does fault code U0100 mean?
U0100 means "Lost Communication With ECM/PCM A": Lost communication with the engine control module (ECM/PCM). Another module (e.g. transmission, ABS, instrument cluster) isn't receiving messages from the engine control module. In modern cars the control units talk over a shared line called CAN; a problem on it can make several warning lights come on at once.
Can you drive with U0100?
With care, short distances. Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.
What causes a U0100 fault?
Most common causes: low battery voltage (very common), the affected module's supply / fuse, break or short in the CAN wiring. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.
How much does a U0100 repair cost?
Depending on the cause, it costs roughly £20 – £980 (parts + labour; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.
Will clearing the U0100 code fix the problem?
No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.
Network and communication (U codes) codes
All network and communication (u codes) codes → · All OBD fault codes →
This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.