P0750 Shift solenoid A malfunction
What does P0750 mean?
There is a problem in the circuit or operation of shift solenoid A in the transmission.
With care, short distances: Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.
P0750 symptoms
- Won't shift into certain gears
- Limp mode
- Harsh shift
P0750 causes (most to least common)
- Most common Faulty solenoid
- Dirty transmission fluid
- Connector / wiring
How do you check and fix P0750?
- Measure the solenoid resistance.
- Change the fluid and filter.
- Check the transmission fluid change interval; despite "lifetime fluid" claims, a change at 60,000–80,000 km is recommended.
❌ Common mistake: Deciding on a rebuild without checking the transmission fluid. Some problems are cured by a fluid and filter change.
P0750 repair cost
Depending on the cause, roughly $30 – $1,200 (parts + labor; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.
Related fault codes
Frequently asked questions
What does fault code P0750 mean?
P0750 means "Shift Solenoid A Malfunction": Shift solenoid A malfunction. There is a problem in the circuit or operation of shift solenoid A in the transmission.
Can you drive with P0750?
With care, short distances. Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.
What causes a P0750 fault?
Most common causes: faulty solenoid, dirty transmission fluid, connector / wiring. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.
How much does a P0750 repair cost?
Depending on the cause, it costs roughly $30 – $1,200 (parts + labor; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.
Will clearing the P0750 code fix the problem?
No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.
Transmission codes
All transmission codes → · All OBD fault codes →
This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.