Transmission · Petrol and diesel

P0740 Torque converter lock-up circuit fault

Standard definition: Torque Converter Clutch Circuit Malfunction

SeverityMedium
Is it safe to drive?With care, short distances
Estimated cost$30 – $1,200
Can you check it yourself?Mechanic needed

What does P0740 mean?

The torque converter clutch (TCC) circuit or its operation is faulty.

With care, short distances: Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

P0740 symptoms

P0740 causes (most to least common)

  1. Most common TCC solenoid
  2. Contaminated fluid
  3. Faulty converter

How do you check and fix P0740?

  1. Check the fluid.
  2. Measure the solenoid resistance.
  3. Check the transmission fluid change interval; despite "lifetime fluid" claims, a change at 60,000–80,000 km is recommended.

❌ Common mistake: Deciding on a rebuild without checking the transmission fluid. Some problems are cured by a fluid and filter change.

P0740 repair cost

Depending on the cause, roughly $30 – $1,200 (parts + labor; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.

Related fault codes

Frequently asked questions

What does fault code P0740 mean?

P0740 means "Torque Converter Clutch Circuit Malfunction": Torque converter lock-up circuit fault. The torque converter clutch (TCC) circuit or its operation is faulty.

Can you drive with P0740?

With care, short distances. Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

What causes a P0740 fault?

Most common causes: tCC solenoid, contaminated fluid, faulty converter. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.

How much does a P0740 repair cost?

Depending on the cause, it costs roughly $30 – $1,200 (parts + labor; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.

Will clearing the P0740 code fix the problem?

No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.

Transmission codes

All transmission codes → · All OBD fault codes →

This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.