P0700 Transmission control system malfunction (TCM code present)
What does P0700 mean?
The ECU is reporting that the transmission control module (TCM) has stored a fault code in its own memory. On its own P0700 is only an information code; the actual fault must be read from the transmission control module.
With care, short distances: Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.
P0700 symptoms
- Transmission limp mode (stuck in 3rd gear)
- Harsh gear changes
- Check engine light
P0700 causes (most to least common)
- Most common Another fault stored in the transmission control module
- Faulty solenoid or sensor
- Low transmission fluid
How do you check and fix P0700?
- Have the transmission control module (TCM) read separately; the real code is there.
- Check the transmission fluid level and colour.
- Check the transmission fluid change interval; despite "lifetime fluid" claims, a change at 60,000–80,000 km is recommended.
❌ Common mistake: Deciding on a rebuild without checking the transmission fluid. Some problems are cured by a fluid and filter change.
P0700 repair cost
Depending on the cause, roughly $30 – $1,200 (parts + labor; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.
Related fault codes
Frequently asked questions
What does fault code P0700 mean?
P0700 means "Transmission Control System Malfunction": Transmission control system malfunction (TCM code present). The ECU is reporting that the transmission control module (TCM) has stored a fault code in its own memory. On its own P0700 is only an information code; the actual fault must be read from the transmission control module.
Can you drive with P0700?
With care, short distances. Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.
What causes a P0700 fault?
Most common causes: another fault stored in the transmission control module, faulty solenoid or sensor, low transmission fluid. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.
How much does a P0700 repair cost?
Depending on the cause, it costs roughly $30 – $1,200 (parts + labor; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.
Will clearing the P0700 code fix the problem?
No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.
Transmission codes
All transmission codes → · All OBD fault codes →
This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.