P0430 Catalytic converter efficiency below threshold (bank 2)
What does P0430 mean?
By comparing the oxygen sensors before and after the catalytic converter, the ECU decided that the bank 2 converter isn't cleaning the exhaust gases well enough. On a healthy converter the downstream sensor stays steady (~0.6–0.7 V); if it fluctuates like the upstream sensor, the converter can't store oxygen.
Drivable: You can keep driving, but don't ignore it; have it checked at the first opportunity.
⚠️ Removing (deleting) the catalytic converter means failing the roadworthiness inspection and breaks environmental law.
P0430 symptoms
- Usually no symptoms while driving
- Check engine light
- Failing the emissions part of the inspection
- When badly blocked: loss of power, a rotten-egg smell
P0430 causes (most to least common)
- Most common Converter aged / melted (from driving for long with misfires or a rich mixture)
- Faulty downstream oxygen sensor
- Exhaust leak before the catalytic converter
- Engine burning oil (coats the converter)
- Poor-quality / aftermarket catalytic converter
How do you check and fix P0430?
- If there is a misfire (P030x) or mixture (P0171/P0172) code, fix that first; those are what damage converters.
- In live data, compare the upstream and downstream oxygen sensor graphs.
- Look for leaks at the exhaust manifold and flanges.
- If the downstream sensor is suspect, replacing the sensor first is far cheaper than replacing the converter.
❌ Common mistake: Clearing the code and waiting for it to come back, or fitting a "cheat" spacer to the downstream sensor. If the root cause isn't found, a new converter will also fail before long.
P0430 repair cost
Depending on the cause, roughly $120 – $3,600 (parts + labor; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.
Related fault codes
Frequently asked questions
What does fault code P0430 mean?
P0430 means "Catalyst System Efficiency Below Threshold (Bank 2)": Catalytic converter efficiency below threshold (bank 2). By comparing the oxygen sensors before and after the catalytic converter, the ECU decided that the bank 2 converter isn't cleaning the exhaust gases well enough. On a healthy converter the downstream sensor stays steady (~0.6–0.7 V); if it fluctuates like the upstream sensor, the converter can't store oxygen.
Can you drive with P0430?
Drivable. You can keep driving, but don't ignore it; have it checked at the first opportunity. Removing (deleting) the catalytic converter means failing the roadworthiness inspection and breaks environmental law.
What causes a P0430 fault?
Most common causes: converter aged / melted (from driving for long with misfires or a rich mixture), faulty downstream oxygen sensor, exhaust leak before the catalytic converter. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.
How much does a P0430 repair cost?
Depending on the cause, it costs roughly $120 – $3,600 (parts + labor; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.
Will clearing the P0430 code fix the problem?
No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.
Emissions: catalytic converter, oxygen sensors, EVAP codes
All emissions: catalytic converter, oxygen sensors, evap codes → · All OBD fault codes →
This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.