P0036 Oxygen sensor heater control circuit fault (bank 1 sensor 2, downstream of the catalytic converter (rear))
What does P0036 mean?
There is a problem in the circuit that controls the heater of the bank 1 sensor 2 (downstream of the catalytic converter (rear)) oxygen sensor (control circuit fault). If the heater does not work, the sensor comes online late on a cold engine; fuel consumption and emissions go up.
Drivable: You can keep driving, but don't ignore it; have it checked at the first opportunity.
P0036 symptoms
- Check engine light
- Higher fuel consumption when cold
- Risk of failing the emissions test
P0036 causes (most to least common)
- Most common Heater element open
- Fuse
- Connector / wiring
- ECU driver (rare)
How do you check and fix P0036?
- Check the fuse.
- Measure the heater resistance and the supply voltage.
- Check whether the wiring touches the exhaust anywhere.
P0036 repair cost
Depending on the cause, roughly $70 – $440 (parts + labor; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.
Related fault codes
Frequently asked questions
What does fault code P0036 mean?
P0036 means "HO2S Heater Control Circuit (Bank 1 Sensor 2)": Oxygen sensor heater control circuit fault (bank 1 sensor 2, downstream of the catalytic converter (rear)). There is a problem in the circuit that controls the heater of the bank 1 sensor 2 (downstream of the catalytic converter (rear)) oxygen sensor (control circuit fault). If the heater does not work, the sensor comes online late on a cold engine; fuel consumption and emissions go up.
Can you drive with P0036?
Drivable. You can keep driving, but don't ignore it; have it checked at the first opportunity.
What causes a P0036 fault?
Most common causes: heater element open, fuse, connector / wiring. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.
How much does a P0036 repair cost?
Depending on the cause, it costs roughly $70 – $440 (parts + labor; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.
Will clearing the P0036 code fix the problem?
No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.
Emissions: catalytic converter, oxygen sensors, EVAP codes
All emissions: catalytic converter, oxygen sensors, evap codes → · All OBD fault codes →
This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.