P0135 Oxygen sensor heater circuit fault (bank 1 sensor 1, upstream of the catalytic converter (front))
What does P0135 mean?
The heater inside the bank 1 sensor 1 oxygen sensor, upstream of the catalytic converter (front), isn't working. The heater lets the sensor start working quickly even when the engine is cold; when it fails, emissions rise on cold running. In most cases the sensor has to be replaced. The upstream sensor measures whether the mixture is rich or lean; the ECU constantly corrects the fuel quantity from it.
Drivable: You can keep driving, but don't ignore it; have it checked at the first opportunity.
P0135 symptoms
- Higher fuel consumption
- Check engine light
- Risk of failing the emissions test
- Slightly rough idle
P0135 causes (most to least common)
- Most common Heater element open (inside the sensor)
- Heater fuse blown
- Connector / wiring fault
How do you check and fix P0135?
- Check the fuse.
- Measure the heater resistance at the sensor connector (usually 2–15 Ω); if it reads infinite, the sensor must be replaced.
- Measure the heater supply voltage (12 V) with the ignition on.
P0135 repair cost
Depending on the cause, roughly $70 – $440 (parts + labor; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.
Related fault codes
Frequently asked questions
What does fault code P0135 mean?
P0135 means "O2 Sensor Heater Circuit Malfunction (Bank 1 Sensor 1)": Oxygen sensor heater circuit fault (bank 1 sensor 1, upstream of the catalytic converter (front)). The heater inside the bank 1 sensor 1 oxygen sensor, upstream of the catalytic converter (front), isn't working. The heater lets the sensor start working quickly even when the engine is cold; when it fails, emissions rise on cold running. In most cases the sensor has to be replaced. The upstream sensor measures whether the mixture is rich or lean; the ECU constantly corrects the fuel quantity from it.
Can you drive with P0135?
Drivable. You can keep driving, but don't ignore it; have it checked at the first opportunity.
What causes a P0135 fault?
Most common causes: heater element open (inside the sensor), heater fuse blown, connector / wiring fault. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.
How much does a P0135 repair cost?
Depending on the cause, it costs roughly $70 – $440 (parts + labor; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.
Will clearing the P0135 code fix the problem?
No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.
Emissions: catalytic converter, oxygen sensors, EVAP codes
All emissions: catalytic converter, oxygen sensors, evap codes → · All OBD fault codes →
This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.