P0346 Camshaft position sensor A (bank 2) range / performance problem
What does P0346 mean?
The value read by the camshaft position (bank 2) sensor doesn't match the other sensors and how the engine is running. The sensor may have drifted (reading a wrong but plausible value), or there is a real problem in the system it measures. On V engines it reports the camshaft position of cylinder bank 2.
Drivable: You can keep driving, but don't ignore it; have it checked at the first opportunity.
P0346 symptoms
- Slow starting
- Misfire
- Loss of power
P0346 causes (most to least common)
- Most common Sensor drift / contamination
- Chain / belt tension problem
- A real problem in the measured system
- Poor connector contact
How do you check and fix P0346?
- In live data, compare the sensor value with the value expected under similar conditions.
- Clean or check the sensor; if needed, replace it with a genuine or good-quality aftermarket part.
- Check for a mechanical problem (leak, blockage) in the related system.
P0346 repair cost
Depending on the cause, roughly $40 – $360 (parts + labor; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.
Related fault codes
Frequently asked questions
What does fault code P0346 mean?
P0346 means "Camshaft Position Sensor A (Bank 2) Range/Performance": Camshaft position sensor A (bank 2) range / performance problem. The value read by the camshaft position (bank 2) sensor doesn't match the other sensors and how the engine is running. The sensor may have drifted (reading a wrong but plausible value), or there is a real problem in the system it measures. On V engines it reports the camshaft position of cylinder bank 2.
Can you drive with P0346?
Drivable. You can keep driving, but don't ignore it; have it checked at the first opportunity.
What causes a P0346 fault?
Most common causes: sensor drift / contamination, chain / belt tension problem, a real problem in the measured system. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.
How much does a P0346 repair cost?
Depending on the cause, it costs roughly $40 – $360 (parts + labor; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.
Will clearing the P0346 code fix the problem?
No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.
Camshaft, crankshaft and variable valve timing (VVT) codes
All camshaft, crankshaft and variable valve timing (vvt) codes → · All OBD fault codes →
This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.