P0345 Camshaft position sensor A (bank 2) circuit fault
What does P0345 mean?
The ECU saw a general fault in the camshaft position (bank 2) sensor circuit. On V engines it reports the camshaft position of cylinder bank 2. When the sensor signal is lost the ECU runs on a substitute value, which causes symptoms such as slow starting.
With care, short distances: Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.
P0345 symptoms
- Slow starting
- Misfire
- Loss of power
P0345 causes (most to least common)
- Most common Faulty sensor
- Loose or corroded connector
- Broken wire / short circuit
- Chain / belt tension problem
How do you check and fix P0345?
- Unplug the connector, check and clean the pins.
- Measure the 5 V reference, ground and signal voltage at the sensor (typical: a 0–5 V square wave on Hall types).
- Inspect the wiring where it rubs against the engine block.
P0345 repair cost
Depending on the cause, roughly $40 – $360 (parts + labor; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.
Related fault codes
Frequently asked questions
What does fault code P0345 mean?
P0345 means "Camshaft Position Sensor A (Bank 2) Circuit Malfunction": Camshaft position sensor A (bank 2) circuit fault. The ECU saw a general fault in the camshaft position (bank 2) sensor circuit. On V engines it reports the camshaft position of cylinder bank 2. When the sensor signal is lost the ECU runs on a substitute value, which causes symptoms such as slow starting.
Can you drive with P0345?
With care, short distances. Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.
What causes a P0345 fault?
Most common causes: faulty sensor, loose or corroded connector, broken wire / short circuit. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.
How much does a P0345 repair cost?
Depending on the cause, it costs roughly $40 – $360 (parts + labor; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.
Will clearing the P0345 code fix the problem?
No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.
Camshaft, crankshaft and variable valve timing (VVT) codes
All camshaft, crankshaft and variable valve timing (vvt) codes → · All OBD fault codes →
This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.