Camshaft, crankshaft and variable valve timing (VVT) · Petrol and diesel

P0343 Camshaft position sensor A (bank 1) signal high

Standard definition: Camshaft Position Sensor A (Bank 1 or Single Sensor) Circuit High

SeverityMedium
Is it safe to drive?With care, short distances
Estimated cost$35 – $320
Can you check it yourself?Yes, the first steps

What does P0343 mean?

The camshaft position (CMP) sensor signal is above its upper limit. It is usually a broken ground wire, the signal shorted to 5 V, or a faulty sensor. The cam sensor identifies which cylinder is at its firing point; sequential injection and VVT rely on it.

With care, short distances: Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

P0343 symptoms

P0343 causes (most to least common)

  1. Most common Ground wire broken
  2. Signal wire shorted to 5 V
  3. Faulty sensor
  4. Connector unplugged

How do you check and fix P0343?

  1. Measure the ground wire continuity.
  2. Check the connector.
  3. Measure the sensor signal with the ignition on.

P0343 repair cost

Depending on the cause, roughly $35 – $320 (parts + labor; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.

Related fault codes

Frequently asked questions

What does fault code P0343 mean?

P0343 means "Camshaft Position Sensor A (Bank 1 or Single Sensor) Circuit High": Camshaft position sensor A (bank 1) signal high. The camshaft position (CMP) sensor signal is above its upper limit. It is usually a broken ground wire, the signal shorted to 5 V, or a faulty sensor. The cam sensor identifies which cylinder is at its firing point; sequential injection and VVT rely on it.

Can you drive with P0343?

With care, short distances. Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

What causes a P0343 fault?

Most common causes: ground wire broken, signal wire shorted to 5 V, faulty sensor. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.

How much does a P0343 repair cost?

Depending on the cause, it costs roughly $35 – $320 (parts + labor; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.

Will clearing the P0343 code fix the problem?

No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.

Camshaft, crankshaft and variable valve timing (VVT) codes

All camshaft, crankshaft and variable valve timing (vvt) codes → · All OBD fault codes →

This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.