Camshaft, crankshaft and variable valve timing (VVT) · Petrol and diesel

P0342 Camshaft position sensor A (bank 1) signal low

Standard definition: Camshaft Position Sensor A (Bank 1 or Single Sensor) Circuit Low

SeverityMedium
Is it safe to drive?With care, short distances
Estimated cost$35 – $320
Can you check it yourself?Yes, the first steps

What does P0342 mean?

The camshaft position (CMP) sensor signal is below its lower limit. Usually the signal wire is shorted to ground, the sensor is faulty, or the connector is unplugged. The cam sensor identifies which cylinder is at its firing point; sequential injection and VVT rely on it.

With care, short distances: Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

P0342 symptoms

P0342 causes (most to least common)

  1. Most common Signal wire shorted to ground
  2. Faulty sensor
  3. Connector problem
  4. Loss of the 5 V reference

How do you check and fix P0342?

  1. Measure the signal voltage with the ignition on.
  2. See whether the value changes when you unplug the connector.
  3. Look for crushed or melted wiring.

P0342 repair cost

Depending on the cause, roughly $35 – $320 (parts + labor; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.

Related fault codes

Frequently asked questions

What does fault code P0342 mean?

P0342 means "Camshaft Position Sensor A (Bank 1 or Single Sensor) Circuit Low": Camshaft position sensor A (bank 1) signal low. The camshaft position (CMP) sensor signal is below its lower limit. Usually the signal wire is shorted to ground, the sensor is faulty, or the connector is unplugged. The cam sensor identifies which cylinder is at its firing point; sequential injection and VVT rely on it.

Can you drive with P0342?

With care, short distances. Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

What causes a P0342 fault?

Most common causes: signal wire shorted to ground, faulty sensor, connector problem. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.

How much does a P0342 repair cost?

Depending on the cause, it costs roughly $35 – $320 (parts + labor; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.

Will clearing the P0342 code fix the problem?

No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.

Camshaft, crankshaft and variable valve timing (VVT) codes

All camshaft, crankshaft and variable valve timing (vvt) codes → · All OBD fault codes →

This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.