P0142 Oxygen sensor circuit fault (bank 1 sensor 3, rearmost (3rd))
What does P0142 mean?
There is a fault in the circuit of the bank 1 sensor 3 oxygen (lambda) sensor, rearmost (3rd). The downstream sensor monitors whether the catalytic converter is working; it has little effect on mixture control.
Drivable: You can keep driving, but don't ignore it; have it checked at the first opportunity.
P0142 symptoms
- Usually no symptoms while driving
- Check engine light
- Risk of failing the emissions test
P0142 causes (most to least common)
- Most common Sensor aged / faulty
- Corroded connector (exhaust heat)
- Wire touched the exhaust and melted
- Exhaust leak before the sensor
How do you check and fix P0142?
- Inspect the connector and wiring where they touch the exhaust pipe.
- Watch how the sensor voltage moves in live data.
- Use a special socket and a warm engine to remove the sensor; take care not to strip the thread.
P0142 repair cost
Depending on the cause, roughly $70 – $440 (parts + labor; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.
Related fault codes
Frequently asked questions
What does fault code P0142 mean?
P0142 means "O2 Sensor Circuit Malfunction (Bank 1 Sensor 3)": Oxygen sensor circuit fault (bank 1 sensor 3, rearmost (3rd)). There is a fault in the circuit of the bank 1 sensor 3 oxygen (lambda) sensor, rearmost (3rd). The downstream sensor monitors whether the catalytic converter is working; it has little effect on mixture control.
Can you drive with P0142?
Drivable. You can keep driving, but don't ignore it; have it checked at the first opportunity.
What causes a P0142 fault?
Most common causes: sensor aged / faulty, corroded connector (exhaust heat), wire touched the exhaust and melted. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.
How much does a P0142 repair cost?
Depending on the cause, it costs roughly $70 – $440 (parts + labor; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.
Will clearing the P0142 code fix the problem?
No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.
Emissions: catalytic converter, oxygen sensors, EVAP codes
All emissions: catalytic converter, oxygen sensors, evap codes → · All OBD fault codes →
This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.