Emissions: catalytic converter, oxygen sensors, EVAP · Petrol and diesel

P0136 Oxygen sensor circuit fault (bank 1 sensor 2, downstream of the catalytic converter (rear))

Standard definition: O2 Sensor Circuit Malfunction (Bank 1 Sensor 2)

SeverityMedium
Is it safe to drive?Drivable
Estimated cost$70 – $440
Can you check it yourself?Mechanic needed

What does P0136 mean?

There is a fault in the circuit of the bank 1 sensor 2 oxygen (lambda) sensor, downstream of the catalytic converter (rear). The downstream sensor monitors whether the catalytic converter is working; it has little effect on mixture control.

Drivable: You can keep driving, but don't ignore it; have it checked at the first opportunity.

P0136 symptoms

P0136 causes (most to least common)

  1. Most common Sensor aged / faulty
  2. Corroded connector (exhaust heat)
  3. Wire touched the exhaust and melted
  4. Exhaust leak before the sensor

How do you check and fix P0136?

  1. Inspect the connector and wiring where they touch the exhaust pipe.
  2. Watch how the sensor voltage moves in live data.
  3. Use a special socket and a warm engine to remove the sensor; take care not to strip the thread.

P0136 repair cost

Depending on the cause, roughly $70 – $440 (parts + labor; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.

Related fault codes

Frequently asked questions

What does fault code P0136 mean?

P0136 means "O2 Sensor Circuit Malfunction (Bank 1 Sensor 2)": Oxygen sensor circuit fault (bank 1 sensor 2, downstream of the catalytic converter (rear)). There is a fault in the circuit of the bank 1 sensor 2 oxygen (lambda) sensor, downstream of the catalytic converter (rear). The downstream sensor monitors whether the catalytic converter is working; it has little effect on mixture control.

Can you drive with P0136?

Drivable. You can keep driving, but don't ignore it; have it checked at the first opportunity.

What causes a P0136 fault?

Most common causes: sensor aged / faulty, corroded connector (exhaust heat), wire touched the exhaust and melted. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.

How much does a P0136 repair cost?

Depending on the cause, it costs roughly $70 – $440 (parts + labor; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.

Will clearing the P0136 code fix the problem?

No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.

Emissions: catalytic converter, oxygen sensors, EVAP codes

P0030Oxygen sensor heater control circuit fault (bank 1 sensor 1, upstream of the catalytic converter (front))P0031Oxygen sensor heater control circuit low (bank 1 sensor 1, upstream of the catalytic converter (front))P0032Oxygen sensor heater control circuit high (bank 1 sensor 1, upstream of the catalytic converter (front))P0036Oxygen sensor heater control circuit fault (bank 1 sensor 2, downstream of the catalytic converter (rear))P0037Oxygen sensor heater control circuit low (bank 1 sensor 2, downstream of the catalytic converter (rear))P0038Oxygen sensor heater control circuit high (bank 1 sensor 2, downstream of the catalytic converter (rear))P0050Oxygen sensor heater control circuit fault (bank 2 sensor 1, upstream of the catalytic converter (front))P0051Oxygen sensor heater control circuit low (bank 2 sensor 1, upstream of the catalytic converter (front))P0052Oxygen sensor heater control circuit high (bank 2 sensor 1, upstream of the catalytic converter (front))P0056Oxygen sensor heater control circuit fault (bank 2 sensor 2, downstream of the catalytic converter (rear))P0057Oxygen sensor heater control circuit low (bank 2 sensor 2, downstream of the catalytic converter (rear))P0058Oxygen sensor heater control circuit high (bank 2 sensor 2, downstream of the catalytic converter (rear))P0130Oxygen sensor circuit fault (bank 1 sensor 1, upstream of the catalytic converter (front))P0131Oxygen sensor signal low (bank 1 sensor 1, upstream of the catalytic converter (front))P0132Oxygen sensor signal high (bank 1 sensor 1, upstream of the catalytic converter (front))P0133Oxygen sensor slow response (bank 1 sensor 1, upstream of the catalytic converter (front))P0134No activity from the oxygen sensor (bank 1 sensor 1, upstream of the catalytic converter (front))P0135Oxygen sensor heater circuit fault (bank 1 sensor 1, upstream of the catalytic converter (front))

All emissions: catalytic converter, oxygen sensors, evap codes → · All OBD fault codes →

This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.