P0976 Shift solenoid B control circuit low
What does P0976 mean?
Low voltage in the shift solenoid B control circuit.
With care, short distances: Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.
P0976 symptoms
- Limp mode
- Won't change gear
P0976 causes (most to least common)
- Most common Solenoid
- Short circuit
How do you check and fix P0976?
- Check the solenoid and wiring.
- Check the transmission fluid change interval; despite "lifetime fluid" claims, a change at 60,000–80,000 km is recommended.
❌ Common mistake: Deciding on a rebuild without checking the transmission fluid. Some problems are cured by a fluid and filter change.
P0976 repair cost
Depending on the cause, roughly £25 – £980 (parts + labour; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.
Related fault codes
Frequently asked questions
What does fault code P0976 mean?
P0976 means "Shift Solenoid B Control Circuit Low": Shift solenoid B control circuit low. Low voltage in the shift solenoid B control circuit.
Can you drive with P0976?
With care, short distances. Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.
What causes a P0976 fault?
Most common causes: solenoid, short circuit. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.
How much does a P0976 repair cost?
Depending on the cause, it costs roughly £25 – £980 (parts + labour; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.
Will clearing the P0976 code fix the problem?
No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.
Transmission codes
All transmission codes → · All OBD fault codes →
This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.