Electrical, charging and ECU · Petrol and diesel

P0611 Injector control module performance

Standard definition: Fuel Injector Control Module Performance

SeverityMedium
Is it safe to drive?With care, short distances
Estimated cost£100 – £1,300
Can you check it yourself?Mechanic needed

What does P0611 mean?

The internal performance test of the injector driver module (separate on some diesels, inside the ECU on others) failed.

With care, short distances: Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

P0611 symptoms

P0611 causes (most to least common)

  1. Most common Faulty driver module
  2. Supply / ground problem
  3. A shorted injector has overloaded the module

How do you check and fix P0611?

  1. Check the injector circuits and the supply.

P0611 repair cost

Depending on the cause, roughly £100 – £1,300 (parts + labour; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.

Related fault codes

Frequently asked questions

What does fault code P0611 mean?

P0611 means "Fuel Injector Control Module Performance": Injector control module performance. The internal performance test of the injector driver module (separate on some diesels, inside the ECU on others) failed.

Can you drive with P0611?

With care, short distances. Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

What causes a P0611 fault?

Most common causes: faulty driver module, supply / ground problem, a shorted injector has overloaded the module. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.

How much does a P0611 repair cost?

Depending on the cause, it costs roughly £100 – £1,300 (parts + labour; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.

Will clearing the P0611 code fix the problem?

No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.

Electrical, charging and ECU codes

All electrical, charging and ecu codes → · All OBD fault codes →

This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.