P0352 Ignition coil B (cylinder 2) primary / secondary circuit fault
What does P0352 mean?
The ECU saw an unexpected current / voltage in the cylinder 2 ignition coil (B) circuit. The coil itself may have failed, or its connector or the wire to the ECU may be at fault. It usually appears together with a cylinder 2 misfire (P0302).
With care, short distances: Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.
P0352 symptoms
- Misfire and shaking on one cylinder
- Loss of power
- Check engine light
- Hard starting (rarely)
P0352 causes (most to least common)
- Most common Internal fault in coil B
- Corrosion or looseness in the coil connector
- Break in the coil supply / ground wire
- Faulty driver circuit in the ECU (rare)
How do you check and fix P0352?
- Unplug the coil connector and look for green corrosion or loose pins.
- Swap the coil with a neighbouring cylinder's and see whether the code and the misfire move.
- Check the coil supply voltage with a multimeter (~12 V with the ignition on).
P0352 repair cost
Depending on the cause, roughly £45 – £290 (parts + labour; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.
Related fault codes
Frequently asked questions
What does fault code P0352 mean?
P0352 means "Ignition Coil B Primary/Secondary Circuit Malfunction": Ignition coil B (cylinder 2) primary / secondary circuit fault. The ECU saw an unexpected current / voltage in the cylinder 2 ignition coil (B) circuit. The coil itself may have failed, or its connector or the wire to the ECU may be at fault. It usually appears together with a cylinder 2 misfire (P0302).
Can you drive with P0352?
With care, short distances. Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.
What causes a P0352 fault?
Most common causes: internal fault in coil B, corrosion or looseness in the coil connector, break in the coil supply / ground wire. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.
How much does a P0352 repair cost?
Depending on the cause, it costs roughly £45 – £290 (parts + labour; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.
Will clearing the P0352 code fix the problem?
No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.
Ignition and misfire codes
All ignition and misfire codes → · All OBD fault codes →
This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.