P0675 Cylinder 5 glow plug circuit fault
What does P0675 mean?
The cylinder 5 glow plug or its circuit is faulty. Usually the plug has burnt out.
Drivable: You can keep driving, but don't ignore it; have it checked at the first opportunity.
P0675 symptoms
- Hard starting in the cold
- Shaking and white smoke on first start
- Glow plug light
P0675 causes (most to least common)
- Most common Cylinder 5 glow plug burnt out
- Glow plug connector / bus bar loose
- Faulty glow plug module output
How do you check and fix P0675?
- Measure the plug resistance.
- Check the connector.
- Glow plugs don't usually have to be replaced as a set; only the faulty one can be replaced.
P0675 repair cost
Depending on the cause, roughly $55 – $320 (parts + labor; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.
Related fault codes
Frequently asked questions
What does fault code P0675 mean?
P0675 means "Cylinder 5 Glow Plug Circuit": Cylinder 5 glow plug circuit fault. The cylinder 5 glow plug or its circuit is faulty. Usually the plug has burnt out.
Can you drive with P0675?
Drivable. You can keep driving, but don't ignore it; have it checked at the first opportunity.
What causes a P0675 fault?
Most common causes: cylinder 5 glow plug burnt out, glow plug connector / bus bar loose, faulty glow plug module output. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.
How much does a P0675 repair cost?
Depending on the cause, it costs roughly $55 – $320 (parts + labor; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.
Will clearing the P0675 code fix the problem?
No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.
Diesel: DPF, glow plugs, high pressure codes
All diesel: dpf, glow plugs, high pressure codes → · All OBD fault codes →
This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.