Diesel: DPF, glow plugs, high pressure · Diesel vehicles

P0673 Cylinder 3 glow plug circuit fault

Standard definition: Cylinder 3 Glow Plug Circuit

SeverityLow
Is it safe to drive?Drivable
Estimated cost$55 – $320
Can you check it yourself?Mechanic needed

What does P0673 mean?

The cylinder 3 glow plug or its circuit is faulty. Usually the plug has burnt out.

Drivable: You can keep driving, but don't ignore it; have it checked at the first opportunity.

P0673 symptoms

P0673 causes (most to least common)

  1. Most common Cylinder 3 glow plug burnt out
  2. Glow plug connector / bus bar loose
  3. Faulty glow plug module output

How do you check and fix P0673?

  1. Measure the plug resistance.
  2. Check the connector.
  3. Glow plugs don't usually have to be replaced as a set; only the faulty one can be replaced.

P0673 repair cost

Depending on the cause, roughly $55 – $320 (parts + labor; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.

Related fault codes

Frequently asked questions

What does fault code P0673 mean?

P0673 means "Cylinder 3 Glow Plug Circuit": Cylinder 3 glow plug circuit fault. The cylinder 3 glow plug or its circuit is faulty. Usually the plug has burnt out.

Can you drive with P0673?

Drivable. You can keep driving, but don't ignore it; have it checked at the first opportunity.

What causes a P0673 fault?

Most common causes: cylinder 3 glow plug burnt out, glow plug connector / bus bar loose, faulty glow plug module output. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.

How much does a P0673 repair cost?

Depending on the cause, it costs roughly $55 – $320 (parts + labor; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.

Will clearing the P0673 code fix the problem?

No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.

Diesel: DPF, glow plugs, high pressure codes

All diesel: dpf, glow plugs, high pressure codes → · All OBD fault codes →

This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.