P0606 ECU processor error
What does P0606 mean?
The ECU's own internal self-tests failed. It can be a genuine ECU fault, but a poor supply / ground connection also triggers this code.
With care, short distances: Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.
P0606 symptoms
- Check engine light
- Occasional stalling or no start
- Limp mode
- Sometimes no symptoms
P0606 causes (most to least common)
- Most common Problem with the ECU supply or ground connection (check this first)
- Low battery voltage
- Moisture / corrosion in the ECU connector
- A genuine ECU fault
- Faulty / incomplete software
How do you check and fix P0606?
- Check the battery voltage and the ECU supply / ground lines.
- Look for moisture or green corrosion in the ECU connector.
- Have a software update done (if one exists).
- Repairing or replacing the ECU is the last resort; a replacement needs immobiliser matching.
P0606 repair cost
Depending on the cause, roughly $40 – $2,000 (parts + labor; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.
Related fault codes
Frequently asked questions
What does fault code P0606 mean?
P0606 means "Control Module Processor Fault": ECU processor error. The ECU's own internal self-tests failed. It can be a genuine ECU fault, but a poor supply / ground connection also triggers this code.
Can you drive with P0606?
With care, short distances. Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.
What causes a P0606 fault?
Most common causes: problem with the ECU supply or ground connection (check this first), low battery voltage, moisture / corrosion in the ECU connector. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.
How much does a P0606 repair cost?
Depending on the cause, it costs roughly $40 – $2,000 (parts + labor; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.
Will clearing the P0606 code fix the problem?
No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.
Electrical, charging and ECU codes
All electrical, charging and ecu codes → · All OBD fault codes →
This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.