Electrical, charging and ECU · Petrol and diesel

P0600 Serial communication link malfunction

Standard definition: Serial Communication Link Malfunction

SeverityMedium
Is it safe to drive?With care, short distances
Estimated cost$40 – $2,000
Can you check it yourself?Mechanic needed

What does P0600 mean?

There is a fault in the internal / external serial line the ECU uses to talk to other modules.

With care, short distances: Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

P0600 symptoms

P0600 causes (most to least common)

  1. Most common Problem with the ECU supply or ground connection (check this first)
  2. Low battery voltage
  3. Moisture / corrosion in the ECU connector
  4. A genuine ECU fault
  5. Faulty / incomplete software

How do you check and fix P0600?

  1. Check the battery voltage and the ECU supply / ground lines.
  2. Look for moisture or green corrosion in the ECU connector.
  3. Have a software update done (if one exists).
  4. Repairing or replacing the ECU is the last resort; a replacement needs immobiliser matching.

P0600 repair cost

Depending on the cause, roughly $40 – $2,000 (parts + labor; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.

Related fault codes

Frequently asked questions

What does fault code P0600 mean?

P0600 means "Serial Communication Link Malfunction": Serial communication link malfunction. There is a fault in the internal / external serial line the ECU uses to talk to other modules.

Can you drive with P0600?

With care, short distances. Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

What causes a P0600 fault?

Most common causes: problem with the ECU supply or ground connection (check this first), low battery voltage, moisture / corrosion in the ECU connector. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.

How much does a P0600 repair cost?

Depending on the cause, it costs roughly $40 – $2,000 (parts + labor; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.

Will clearing the P0600 code fix the problem?

No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.

Electrical, charging and ECU codes

All electrical, charging and ecu codes → · All OBD fault codes →

This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.