EGR and intake system · Petrol and diesel

P0406 EGR position sensor A signal high

Standard definition: Exhaust Gas Recirculation Sensor A Circuit High

SeverityLow
Is it safe to drive?Drivable
Estimated cost$95 – $960
Can you check it yourself?Mechanic needed

What does P0406 mean?

The EGR valve position sensor is giving a high signal. EGR feeds part of the exhaust gas back into the intake, lowering combustion temperature and NOx emissions.

Drivable: You can keep driving, but don't ignore it; have it checked at the first opportunity.

⚠️ EGR delete (blanking) is done in software, causes problems at the inspection / emissions test and is also illegal.

P0406 symptoms

P0406 causes (most to least common)

  1. Most common EGR valve stuck with soot
  2. EGR passages / cooler blocked
  3. Faulty valve motor or position sensor
  4. Connector and wiring problem
  5. On vacuum-operated types, the vacuum hose / solenoid

How do you check and fix P0406?

  1. Remove the EGR valve, clean off the soot and check the passages.
  2. Run an EGR open-close test with a diagnostic tool and watch the position value.
  3. On electric types, measure the connector and the valve motor resistance.
  4. An adaptation may be needed after cleaning.

❌ Common mistake: Replacing the valve without cleaning it. Most P0401 cases come from a blocked passage or a sooted-up valve.

P0406 repair cost

Depending on the cause, roughly $95 – $960 (parts + labor; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.

Related fault codes

Frequently asked questions

What does fault code P0406 mean?

P0406 means "Exhaust Gas Recirculation Sensor A Circuit High": EGR position sensor A signal high. The EGR valve position sensor is giving a high signal. EGR feeds part of the exhaust gas back into the intake, lowering combustion temperature and NOx emissions.

Can you drive with P0406?

Drivable. You can keep driving, but don't ignore it; have it checked at the first opportunity. EGR delete (blanking) is done in software, causes problems at the inspection / emissions test and is also illegal.

What causes a P0406 fault?

Most common causes: eGR valve stuck with soot, eGR passages / cooler blocked, faulty valve motor or position sensor. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.

How much does a P0406 repair cost?

Depending on the cause, it costs roughly $95 – $960 (parts + labor; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.

Will clearing the P0406 code fix the problem?

No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.

EGR and intake system codes

All egr and intake system codes → · All OBD fault codes →

This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.