Camshaft, crankshaft and variable valve timing (VVT) · Petrol and diesel

P0341 Camshaft position sensor A (bank 1) range / performance problem

Standard definition: Camshaft Position Sensor A (Bank 1 or Single Sensor) Range/Performance

SeverityMedium
Is it safe to drive?Drivable
Estimated cost$35 – $320
Can you check it yourself?Yes, the first steps

What does P0341 mean?

The value read by the camshaft position (CMP) sensor doesn't match the other sensors and how the engine is running. The sensor may have drifted (reading a wrong but plausible value), or there is a real problem in the system it measures. The cam sensor identifies which cylinder is at its firing point; sequential injection and VVT rely on it.

Drivable: You can keep driving, but don't ignore it; have it checked at the first opportunity.

P0341 symptoms

P0341 causes (most to least common)

  1. Most common Sensor drift / contamination
  2. Damage to the camshaft reluctor
  3. Timing belt / chain has jumped a tooth
  4. A real problem in the measured system
  5. Poor connector contact

How do you check and fix P0341?

  1. In live data, compare the sensor value with the value expected under similar conditions.
  2. Clean or check the sensor; if needed, replace it with a genuine or good-quality aftermarket part.
  3. Check for a mechanical problem (leak, blockage) in the related system.

P0341 repair cost

Depending on the cause, roughly $35 – $320 (parts + labor; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.

Related fault codes

Frequently asked questions

What does fault code P0341 mean?

P0341 means "Camshaft Position Sensor A (Bank 1 or Single Sensor) Range/Performance": Camshaft position sensor A (bank 1) range / performance problem. The value read by the camshaft position (CMP) sensor doesn't match the other sensors and how the engine is running. The sensor may have drifted (reading a wrong but plausible value), or there is a real problem in the system it measures. The cam sensor identifies which cylinder is at its firing point; sequential injection and VVT rely on it.

Can you drive with P0341?

Drivable. You can keep driving, but don't ignore it; have it checked at the first opportunity.

What causes a P0341 fault?

Most common causes: sensor drift / contamination, damage to the camshaft reluctor, timing belt / chain has jumped a tooth. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.

How much does a P0341 repair cost?

Depending on the cause, it costs roughly $35 – $320 (parts + labor; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.

Will clearing the P0341 code fix the problem?

No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.

Camshaft, crankshaft and variable valve timing (VVT) codes

All camshaft, crankshaft and variable valve timing (vvt) codes → · All OBD fault codes →

This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.