Camshaft, crankshaft and variable valve timing (VVT) · Petrol and diesel

P0337 Crankshaft position sensor A signal low

Standard definition: Crankshaft Position Sensor A Circuit Low

SeverityHigh
Is it safe to drive?With care, short distances
Estimated cost$40 – $360
Can you check it yourself?Yes, the first steps

What does P0337 mean?

The crankshaft position (CKP) sensor signal is below its lower limit. Usually the signal wire is shorted to ground, the sensor is faulty, or the connector is unplugged. The crank sensor reports engine speed and piston position; without its signal the engine won't run.

With care, short distances: Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

P0337 symptoms

P0337 causes (most to least common)

  1. Most common Signal wire shorted to ground
  2. Faulty sensor
  3. Connector problem
  4. Loss of the 5 V reference

How do you check and fix P0337?

  1. Measure the signal voltage with the ignition on.
  2. See whether the value changes when you unplug the connector.
  3. Look for crushed or melted wiring.

P0337 repair cost

Depending on the cause, roughly $40 – $360 (parts + labor; an approximate range that varies by garage and region). Jobs such as cleaning a connector or a simple adjustment may cost less than the lower end; replacing a major part comes close to the upper end. Getting the diagnosis right first avoids replacing parts unnecessarily.

Related fault codes

Frequently asked questions

What does fault code P0337 mean?

P0337 means "Crankshaft Position Sensor A Circuit Low": Crankshaft position sensor A signal low. The crankshaft position (CKP) sensor signal is below its lower limit. Usually the signal wire is shorted to ground, the sensor is faulty, or the connector is unplugged. The crank sensor reports engine speed and piston position; without its signal the engine won't run.

Can you drive with P0337?

With care, short distances. Don't set off on a long journey; take it to a garage as soon as possible. Stop if the symptoms get worse.

What causes a P0337 fault?

Most common causes: signal wire shorted to ground, faulty sensor, connector problem. For a definitive diagnosis, live data and any other stored codes should be assessed together with this code.

How much does a P0337 repair cost?

Depending on the cause, it costs roughly $40 – $360 (parts + labor; an approximate range that varies by garage and region). It may be fixed by simply cleaning a connector or may need a part replaced; the correct diagnosis comes first.

Will clearing the P0337 code fix the problem?

No. Clearing the code only switches the light off temporarily; if the fault isn't fixed, the code comes back within a few drives. Recently cleared codes can also be spotted from the OBD readiness monitors — an important check when buying used.

Camshaft, crankshaft and variable valve timing (VVT) codes

All camshaft, crankshaft and variable valve timing (vvt) codes → · All OBD fault codes →

This page is for general information; details may vary by make and engine. For a definitive diagnosis, see an authorised service centre or a specialist mechanic.